Trunk / Liftgate Latch: Service and Repair

Rear Compartment Lid Latch Replacement (Without interior lid release handle )

Removal Procedure

1. Remove the rear compartment lid trim.




2. Disconnect the electrical connector from the lid latch assembly.
3. Disconnect the latch cable from the lock cylinder.
4. Remove the fasteners securing the lid latch assembly.
5. Remove the lid latch assembly.

Installation Procedure




1. Install the lid latch assembly.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the fasteners in order to secure the lid latch assembly.

Tighten the fasteners 10.5 N.m (93 lb in).

3. Install the latch cable to the lock cylinder.
4. Connect the electrical connector to the lid latch assembly.
5. Install the rear compartment lid trim.