Oil Pump Pipe and Screen Assembly Replacement

Removal Procedure

Notice: Refer to Oil Level Sensor Removal Notice in Service Precautions.





1. Remove the oil level sensor.
2. Remove the oil pan. Refer to Oil Pan Replacement.
3. Remove the oil pump pipe screen bolts.
4. Remove the oil pump screen.
5. Remove the gasket.
6. Use solvent in order to clean the screen and the housing. Blow dry the screen and the housing.
7. Clean the gasket mating surfaces.

Installation Procedure

Notice: Refer to Oil Level Sensor Installation Notice in Service Precautions.





1. Install the oil pump screen gasket.
2. Install the oil pump screen.

Notice: Refer to Fastener Notice in Service Precautions.

3. Install the oil pump screen bolts.
- Tighten the oil pump screen bolts to 15 Nm (11 ft. lbs.).
4. Install the oil pan. Refer to Oil Pan Replacement.
5. Install the oil level sensor.