With RPO NC1 - California Emissions

1. Remove the EGR inlet pipe from the exhaust manifold.
2. Remove the EGR mounting bracket bolts.
3. Remove the EGR mounting bracket.





4. Remove air injection pipe assembly nuts.
5. Remove air injection pipe.





6. Remove the heated oxygen sensor lead.





7. Remove vacuum solenoid and lines.





8. Remove Air Injection check valve bolts.
9. Remove air injection check valve.





10. Remove the fuel injector sight shield mounting bracket nuts.
11. Remove the fuel injector sight shield mounting bracket.





12. Remove the exhaust manifold studs.
13. Remove the exhaust manifold.
14. Remove the exhaust manifold gasket.