Mode Air Door

Once conditioned to the correct temperature, the air enters the air distribution chamber. Air flow doors in the HVAC module are positioned by the mode actuator. By varying the position of the air flow doors, the air distribution chamber is able to direct airflow to the floor, windshield or instrument panel outlets. The direction of the air is varied by the mode actuator that is controlled by the following:
^ The IPM or the HVAC control head (Automatic System CJ2)
^ The HVAC control head (Manual System C67)

For a description of the RPO Code(s) shown in this article/images refer to the RPO Code List found at Vehicle/Application ID RPO Codes