Instrument Panel (IP) - Module Replacement

REMOVAL PROCEDURE
1. Remove the left sound insulator.
2. Remove the fastener (2) from the Instrument Panel Module (IPM).
3. Rotate the IPM up and out of the mag beam.
4. Disconnect the electrical connectors from the IPM (1).

INSTALLATION PROCEDURE
1. Connect the electrical connectors to the IPM (1).
2. Install the IPM (1) to the mag beam by inserting the top tab of the module into the slot on the mag beam and rotating down.
3. Install the fastener.
4. Install the left sound insulator.