Scan Tool Data Definitions
CLIMATE CONTROL PANEL (CCP)8 Digit GM Part Number: Scan tool displays: part number - Display indicates the part number of the CCP.
Ambient Light Sensor: Scan tool displays: volts - Display indicates the ambient light sensor input signal, 0.09 - 4.75 volts is the normal operating range.
Calibration ID: Scan tool displays: number - Display indicates the 4 digit calibration ID of the CCP.
Front Fog Lamp Switch: Scan tool displays: On/Off - Display indicates the state of the front fog lamp switch.
Interior Dim Pot: Scan tool displays: volts - Display indicates the IP dimmer switch input signal, 0.09 - 4.75 volts is the normal operating range.
Interior Lamp Switch: Scan tool displays: On/Off - Display indicates the state of the interior lamp switch.
Key Cylinder Halo Lamp: Scan tool displays: On/Off - Display indicates the commanded state of the key cylinder halo lamp.
PROM ID: Scan tool displays: number - Display indicates the 4 digit PROM ID of the CCP.
Twilight Delay Pot: Scan tool displays: volts - Display indicates the twilight delay switch input signal, 0.09 - 4.75 volts is the normal operating range.
Drivers Door Module (DDM)
8 Digit GM Part Number: Scan tool displays: part number - Display indicates the part number of the DDM.
Battery Voltage: Scan tool displays: volts - Display indicates the battery voltage input, 0 - 30 volts is the operating range.
Calibration ID: Scan tool displays: number - Display indicates the 4 digit calibration ID of the DDM.
Drivers Door Jamb Switch: Scan tool displays: On/Off - Display indicates the state of the drivers door jamb switch. On indicates the door is open and Off indicates the door is closed.
Left Rear Door Jamb Sw.: Scan tool displays: On/Off - Display indicates the state of the left rear door jamb switch. On indicates the door is open and Off indicates the door is closed.
Pass. Door Jamb Sw.: Scan tool displays: On/Off - Display indicates the state of the right front door jamb switch. On indicates the door is open and Off indicates the door is closed.
PROM ID: Scan tool displays: number - Display indicates the 4 digit PROM ID of the DDM.
Rt. Rear Door Jamb Switch: Scan tool displays: On/Off - Display indicates the state of the right rear door jamb switch. On indicates the door is open and Off indicates the door is closed.
DASH INTEGRATION MODULE (DIM)
8 Digit GM Part Number: Scan tool displays: part number - Display indicates the part number of the DDM.
Battery Voltage: Scan tool displays: volts - Display indicates the battery voltage input, 0 - 30 volts is the operating range.
Calibration ID: Scan tool displays: number - Display indicates the 4 digit calibration ID of the DDM.
Daytime Running Lamp: Scan tool displays: On/Off - Display indicates the commanded state of the daytime running lamp relay.
Flash to Pass Switch: Scan tool displays: On/Off - Display indicates the state of the flash to pass switch.
Front Fog Lamp Relay: Scan tool displays: On/Off - Display indicates the commanded state of the front fog lamp relay.
Head Lamp Switch: Scan tool displays: On/Off - Display indicates the state of the flash to pass switch signal. On indicates the flash to pass headlamps are requested on.
high Beam Output
Incandescent Dim #1: Scan tool displays: On/Off - Display indicates the state of the incandescent lamp ground circuit.
Lights On with Wipers: Scan tool displays: On/Off - Display indicates the state of the wiper/washer system.
Low Beam Output: Scan tool displays: On/Off - Display indicates the commanded state of the low beam relay.
Park Lamp: Scan tool displays: On/Off - Display indicates the state of the park lamp switch.
Park Lamp Relay Output: Scan tool displays: On/Off - Display indicates the commanded state of the park lamp relay.
PROM ID: Scan tool displays: number - Display indicates the 4 digit PROM ID of the DIM.
HEADS UP DISPLAY (HUD)
8 Digit GM Part Number: Scan tool displays: part number - Display indicates the part number of the HUD.
Calibration ID: Scan tool displays: number - Display indicates the 4 digit calibration ID of the HUD.
Highbeam Switch: Scan tool displays: On/Off - Display indicates the state of the headlamp high beam switch.
Lt.. Turning Signal Sw.: Scan tool displays: On/Off -Display indicates the state of the left turn signal switch.
PROM ID: Scan tool displays: number - Display indicates the 4 digit PROM ID of the HUD.
Rt. Turning Signal Sw.: Scan tool displays: On/Off -Display indicates the state of the right turn signal switch.
INSTRUMENT PANEL CLUSTER (IPC)
8 Digit GM Part Number: Scan tool displays: part number - Display indicates the part number of the IPC.
Battery Voltage: Scan tool displays: volts - Display indicates the battery voltage input, 0 - 30 volts is the operating range.
High Beam Lamp: Scan tool displays: On/Off - Display indicates the state of the headlamp high beam switch.
Lt.. Turning Signal: Scan tool displays: On/Off - Display indicates the state of the left turn signal switch.
PROM ID: Scan tool displays: number - Display indicates the 4 digit PROM ID of the IPC.
Rt. Turning Signal Sw.: Scan tool displays: On/Off -Display indicates the state of the right turn signal switch.
Serial Number: Scan tool displays: number - Display indicates the serial number of the IPC.
INSTRUMENT PANEL MODULE (IPM)
8 Digit GM Part Number: Scan tool displays: part number - Display indicates the part number of the IPM.
Ambient Light Sensor: Scan tool displays: volts - Display indicates the ambient light sensor input signal, 0.09 - 4.75 volts is the normal operating range.
Calibration ID: Scan tool displays: number - Display indicates the 4 digit calibration ID of the IPM.
Front Fog Lamp Switch: Scan tool displays: On/Off - Display indicates the state of the front fog lamp switch.
Interior Dim Pot: Scan tool displays: volts - Display indicates the IP dimmer switch input signal, 0.09 - 4.75 volts is the normal operating rang.
Interior Lamp Switch: Scan tool displays: On/Off - Display indicates the state of the interior lamp switch.
Key Cylinder Halo Lamp: Scan tool displays: On/Off - Display indicates the commanded state of the key cylinder halo lamp.
PROM ID: Scan tool displays: number - Display indicates the 4 digit PROM ID of the IPM.
Twilight Delay Pot: Scan tool displays: volts - Display indicates the twilight delay switch input signal, 0.09 - 4.75 volts is the normal operating range.
REAR INTEGRATION MODULE (RIM)
8 Digit GM Part Number: Scan tool displays: part number - Display indicates the part number of the RIM.
Battery Voltage: Scan tool displays: volts - Display indicates the battery voltage input, 0 - 30 volts is the operating range.
Calibration ID: Scan tool displays: number - Display indicates the 4 digit calibration ID of the RIM.
Drivers Door Jamb Switch: Scan tool displays: On/Off - Display indicates the state of the drivers door jamb switch. On indicates the door is open and Off indicates the door is closed.
Inadvertent Power Input: Scan tool displays: Active/Inactive - Display indicates the state of the inadvertent power.
Inadvertent Power Relay: Scan tool displays: On/Off - Display indicates the commanded state of the inadvertent power relay.
Left Rear Door Jamb Sw.: Scan tool displays: On/Off - Display indicates the state of the left rear door jamb switch. On indicates the door is open and Off indicates the door is closed.
Overhead Lamps Output: Scan tool displays: On/Off - Display indicates the commanded state of the overhead lamps.
Pass. Door Jamb Sw.: Scan tool displays: On/Off - Display indicates the state of the right front door jamb switch. On indicates the door is open and Off indicates the door is closed.
PROM ID: Scan tool displays: number - Display indicates the 4 digit PROM ID of the RIM.
Reverse Lamp Relay: Scan tool displays: On/Off - Display indicates the commanded state of the reverse lamp relay.
Rt. Rear Door Jamb Switch: Scan tool displays: On/Off - Display indicates the state of the right rear door jamb switch. On indicates the door is open and Off indicates the door is closed.