Rear Wheel Alignment

Important: Complete the left and right rear toe adjustments separately, per wheel. Using the following procedure.





1. Loosen the inner adjustment link cam nut.

Notice: Refer to Fastener Notice in Service Precautions.

2. In order to adjust the toe, rotate the cam bolt using an 18 mm socket. Refer to Fastener Tightening Specifications in Wheel Alignment.
Tighten the cam (2) nut to 75 Nm (55 ft. lbs.).
3. Recheck the toe setting after tightening.
4. Readjust the toe setting if necessary. Refer to Wheel Alignment Specifications in Wheel Alignment.