Child Restraint: Service and Repair

REMOVAL PROCEDURE




1. Remove the rear shelf trim panel.
2. Remove the rear shelf trim panel carrier.




3. Remove the fasteners from the child tether anchors.
4. Remove the child tether anchors from the vehicle.

INSTALLATION PROCEDURES




1. Install the child tether anchors to the vehicle.

NOTE: Refer to Fastener Notice in cautions and Notice.

2. Install the child tether anchor fasteners.

Tighten
Tighten the fastener to 30 N.m (22 lb.ft)




3. Install the rear shelf trim panel carrier.
4. Install the rear shelf trim panel.