Trunk / Liftgate Switch: Service and Repair

Rear Compartment Release Switch Replacement




REMOVAL PROCEDURE
1. Open the instrument panel storage compartment door.
2. Remove the IP compartment.
3. Disconnect the electrical connector (2).
4. Remove the switch by depressing the locking tabs in order to push out of the IP compartment.

INSTALLATION PROCEDURE
1. Install the IP compartment with the electrical connector (2) exposed through the switch opening.
2. Connect the electrical connector (2) to the switch (1).
3. Install the rear compartment release switch (1) by pressing into the IP storage compartment bin until firmly seated.
4. Close the instrument panel storage compartment door.