General

Bolt/Screw, Automatic Transaxle Case Extension M10 x 1.5 x 35 (Qty 4) 36 Nm (26 ft. lbs.)
Stud/Screw, Vehicle Speed Sensor - M8 x 1.25 x 12 (Qty 1) 12 Nm (106 inch lbs.)
Bolt/Screw, Forward Band Servo Cover - M6 x 1.0 x 20 (Qty 3) 12 Nm (106 inch lbs.)
Bolt, Oil Pan Nm 6 x 1.0 x 17 (Qty 20) 14 Nm (10 ft. lbs.)
Fitting, Transaxle Oil Cooler Pipe - 1/4 - 18 NPSF (Qty 2) 38 Nm (28 ft. lbs.)
Plug, Automatic Transaxle Oil Pressure Test Hole 1/8 - 27 NPTF (Qty 1) 12 Nm (106 inch lbs.)
Bolt/Screw, Case Side Cover (Flange) - M8 x 1.25 x 25 (Qty 9) 25 Nm (18 ft. lbs.)
Bolt/Screw, Case Side Cover (Torx(R) Special) - M8 x 1.25 x 21 (Qty 4) 25 Nm (18 ft. lbs.)
Bolt/Screw, Case Side Cover (stud) - M8 x 1.25 x 24 (Qty 4) 25 Nm (18 ft. lbs.)
Bolt/Screw, Manual 2-1 Band Servo Cover - M8 x 1.25 x 25 (Qty 3) 25 Nm (18 ft. lbs.)
Bolt/Screw, Accumulator Cover - M6 x 1.0 x 28 (Qty 11) 12 Nm (106 inch lbs.)
Bolt/Screw, Automatic Transaxle Oil Pump Cover M6 x 1.0 x 20 (Qty 1) 8 Nm (70 inch lbs.)
Bolt/Screw, Automatic Transaxle Oil Pump - M6 x 1.0 x 95 (Qty 2) 16 Nm (11 ft. lbs.)
Bolt/Screw, Automatic Transaxle Oil Pump - M6 x 1.0 x 85 (Qty 9) 12 Nm (106 inch lbs.)
Bolt/Screw, Control Valve Body - M6 x 1.0 x 65 (Qty 3) 12 Nm 106 inch lbs.)
Bolt/Screw, Control Valve Body - M6 x 1.0 x 60 (Qty 3) 12 Nm (106 inch lbs.)
Bolt/Screw, Control Valve Body - M6 x 1.0 x 30 (Qty 1) 12 Nm (106 inch lbs.)
Bolt/Screw, Control Valve Body (Torx(R)) - M6 x 1.0 x 45 (Qty 2) 12 Nm (106 inch lbs.)
Bolt/Screw, Control Valve Body - M6 x 1.0 x 55 (Qty 3) 12 Nm (106 inch lbs.)
Bolt/Screw, Control Valve Body - M6 x 1.0 x 95 (Qty 1) 16 Nm (11 ft. lbs.)
Bolt/Screw, Control Valve Body - M8 x 1.25 x 90 (Qty 1) 25 Nm (18 ft. lbs.)
Bolt/Screw, Control Valve Body - M6 x 1.0 x 20 (Qty 2) 8 Nm (70 inch lbs.)
Bolt/Screw, Control Valve Body - M6 x 1.0 x 85 (Qty 1) 12 Nm (106 inch lbs.)
Bolt/Screw, Automatic Transaxle Case Cover (Torx(R) Special) M6 x 1.0 x 32 (Qty 1) 12 Nm (106 inch lbs.)
Bolt/Screw, Automatic Transaxle Case Cover - M6 x 1.0 x 40 (Qty 3) 12 Nm (106 inch lbs.)
Bolt/Screw, Automatic Transaxle Case Cover - M8 x 1.25 x 50 (Qty 3) 25 Nm (18 ft. lbs.)
Bolt/Screw, Automatic Transaxle Case Cover - M6 x 1.0 x 30 (Qty 3) 12 Nm (106 inch lbs.)
Bolt/Screw, Drive Sprocket Support - M8 x 1.25 x 24 (Qty 4) 25 Nm (18 ft. lbs.)
Nut, Manual Shift Shaft Detent Lever - M 10 x 1.5 (Qty 1) 32 Nm (23 ft. lbs.)
Bolt/Screw, Manual Shift Shaft Detent - M6 x 1.0 x 16 (Qty 1) 12 Nm (106 inch lbs.)