Tilt Spring - Assemble

Assembly Procedure





1. Lubricate spring guide with synthetic grease. Install the spring guide (1) into the tilt spring (2).

Caution: The tilt spring and the spring guide are under pressure and could become a projectile. During the disassembly and assembly procedures, secure the tilt spring. Exercise caution when removing or installing the tilt spring and the spring guide, as bodily injury may result.





2. Install the tilt spring (1).
2.1. Install the tilt spring (1) to the post on the steering column support assembly (2).
2.2. Secure the tilt spring (1).
3. Install the upper and lower shrouds. Refer to Steering Column Trim Covers - Assemble - Off Vehicle.