Scan Tool Data Definitions - ALC
RIM - Auto Leveling Information Data List - Leveling Sensor Feed: Voltage feed to the suspension position sensor.RIM - Auto Leveling Information Data List - Accum Fault - Compressor: A defined period of time that the compressor is active with out an exhaust cycle.
RIM - Auto Leveling Information Data List - Progress Fault - Compressor: A defined period of time that the compressor is active and no change is detected by the sensor.
RIM - Auto Leveling Information Data List - Accum Fault - Exhaust: A defined period of time that the exhaust is active with out a compressor cycle.
RIM - Auto Leveling Information Data List - Progress Fault - Exhaust: A defined period of time that the exhaust is active and no change is detected at the sensor.
RIM - Auto Leveling Information Data List - Trim Value: A value programmed in the RIM.
RIM - Auto Leveling Information Data List -Filtered Position Valve: As the vehicle operates the suspension position sensor is monitored, and the information is filtered, to the RIM so it can adjust the suspension.
RIM - Module 1 Information Data List - Prom I.D.: The modules internal "PROM" identifier.
RIM - Module 1 Information Data List - Calibration I.D.: This number designates the modules calibration.
RIM- ALC Relearn: This procedure reprograms the RIM with the ride height specification, per the suspension option.