Fixed Antenna Replacement

REMOVAL PROCEDURE
1. Remove the mast antenna.
2. Remove the quarter inner rear trim finishing panel.
3. Remove the spare tire and the jack.
4. Remove the antenna cable (3) from the antenna bracket (4).
5. Remove the antenna bracket bolt (5).
6. Pull down the antenna bracket (4) from the antenna bezel (2). Disengage the bracket.
7. Remove the antenna bracket (4).
8. Unsnap the bezel (2) from the rear quarter panel.
9. Remove the antenna bezel (2).

INSTALLATION PROCEDURE
1. Snap the bezel (2) into the rear quarter panel by aligning the bezel.
2. Install the antenna bezel (2).
3. Install the antenna bracket (4).

NOTE: Refer to Fastener Notice in Service Precautions.

4. Install the antenna bracket bolt (5).

Tighten
Tighten the antenna bracket bolt (5) to 5 N.m (44 lb in).

5. Install the antenna cable (3) to the antenna bracket (4).
6. Install the spare tire and the jack.
7. Install the quarter inner rear trim finishing panel.
8. Install the mast antenna.