Speaker Replacement - Front

REMOVAL PROCEDURE
1. Remove the front side door trim.
2. Pull the corner of water deflector back as needed.
3. Remove the door speaker bolts.
4. Gently pull the door speaker forward to access the electrical connector.
5. Disconnect the door speaker electrical connector.
6. Remove the door speaker from the vehicle.

INSTALLATION PROCEDURE
1. Install the door speaker to the vehicle.
2. Connect the door speaker electrical connector.
3. Align speaker to door.

NOTE: Refer to Fastener Notice in Service Precautions.

4. Install the door speaker bolts using the sequence on the speaker housing.

Tighten
Tighten the door speaker bolts to 2.5 N.m (22 lb in).

5. Press the water deflector back into place.
6. Install the front side door trim.