Trunk / Liftgate Interior Trim Panel: Service and Repair

Liftgate Trim Panel Replacement

Removal Procedure




1. Open the rear compartment lift window.
2. Unsnap and remove the 11 fasteners holding the inner cover (1, 2) from the rear compartment lift window.

Installation Procedure




1. Line up the inner cover trim panel (1, 2) with cutouts over the struts.
2. Position and snap the 11 fasteners to install the inner cover (1, 2) to the rear compartment lift window.
3. Install the quarter inner rear trim finishing panel.
4. Install the sunshade, if equipped.
5. Close the rear compartment lift window.