Instrument Panel Compartment - Door Replacement

Instrument Panel Compartment Door Replacement

Removal Procedure




1. Open the instrument panel (IP) compartment door.
2. Remove the contents of the IP compartment.
3. Remove the IP compartment hinge screws.
4. Remove the IP compartment door from the IP.

Installation Procedure




1. Install the IP compartment door to the IP.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the IP compartment hinge screws.

Tighten the screws to 2.8 N.m (25 lb in).

3. Install the contents of the IP compartment.
4. Close the IP compartment door.