Windshield Pillar Garnish Molding Replacement

Windshield Pillar Garnish Molding Replacement

Removal Procedure




1. Remove the screws (1) from garnish molding (2) (w/T-Tops only).

Important: Without T-Tops, garnish molding is retained by "S" clips and not screws. Molding can be gently pulled from its installed location.

2. Remove the garnish molding (2) from windshield pillar (3).

Installation Procedure




1. Install the garnish molding (2) to windshield pillar (3).

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the screws (1) to garnish molding (2).

Tighten the screws to 1.7 N.m (15 lb in).