Windshield Side Garnish Molding Replacement (w/ Lift Off Window Panels)

Windshield Side Garnish Molding Replacement (w/ Lift Off Window Panels)

Removal Procedure




1. Open the vehicle door.
2. Remove the lift-off window panel.
3. Remove the garnish molding screws.
4. Remove the windshield upper garnish molding by pulling away from the inner side frame.

Installation Procedure




1. Install the upper garnish molding.

* Align the clips to the holes on the inner side frame and apply pressure to secure.
* Align S-clips on upper garnish molding to door opening flange and apply pressure to secure.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the garnish molding screws.

Tighten the garnish molding screws to 1.7 N.m (15 lb in).

3. Install the lift-off window panel.
4. Close the vehicle door.