Power Folding Top Bow Replacement (Folding Top Number 5 Bow)

Power Folding Top Bow Replacement (Folding Top Number 5 Bow)

Removal Procedure




1. Turn the pump bypass valve fully clockwise to the open position. Refer to Power Folding Top Operation.
2. Remove the bolts connecting the headlining trim finish panel elastic tension straps to the number 5 bow (44).
3. Remove the rear retaining nuts from the number 5 bow (9).
4. Raise the number 5 bow (9) over the top cover.
5. Remove the staples attaching the number 5 bow (9) to the following components:

* The attaching cover
* The rear window (1)
* The number 4 and 5 bow position pad

6. Mark the position of the staples.
7. Remove the number 5 bow (9).

Installation Procedure




1. Install the following components to the number 5 bow (9) by stapling into the original positions:

* The number 4 and 5 bow position pad.
* The rear window (1)
* The cover

2. Install the number 5 bow (9) to the rear mounting studs.
3. Install the rear retainer nuts to the number 5 bow mounting studs.
4. Install the bolts connecting the headlining trim finish panel elastic tension strap to the number 5 bow (9).
5. Turn the pump bypass valve fully counterclockwise to the closed position. Refer to Power Folding Top Operation.