Operation CHARM: Car repair manuals for everyone.

Folding Top Side Front Weatherstrip Replacement



Folding Top Side Front Weatherstrip Replacement

Removal Procedure




1. Lower the folding top to a suitable working position.

Caution: Refer to Battery Disconnect Caution in Service Precautions.

2. Disconnect the negative battery cable.
3. Remove the front side door window upper rear weatherstrip bolts (1).
4. Remove the front side door window upper rear weatherstrip (2).

Installation Procedure




1. Line up the top tab of the weatherstrip (1) to the notch in the weatherstrip retainer (2).
2. Insert the weatherstrip (1) into the retainer (2).
3. Roll the weatherstrip into place.






Notice: Refer to Fastener Notice in Service Precautions.

4. Install the front side door window upper rear weatherstrip bolts (1).

Tighten the bolts (1) to 1.3 N.m (12 lb in).

5. Connect the negative battery cable.
6. Raise the folding top.