Removing the Convertible Top Boot

1. Open the rear compartment lid.
2. Perform the following steps from inside of the vehicle:
2.1. Grasp the loop at the top of the rear seat back assembly.
2.2. Pull forward in order to fold the seat back down to the horizontal position.
3. Pull the snap knob in order to disengage the boot center cover from the ball stud.
4. Tuck the boot center cover behind the rear seat back.
5. Verify that the center cover does not cover the rear seat back latch.
6. Unsnap the boot side cover assembly at the top of the upper rear of the quarter trim panel.
7. Lift the boot side cover eyelet from the ball stud.
8. Raise the boot side cover up in order to unhook the retainer from the bezel at the top of the quarter trim panel.
9. On the other side of the vehicle, raise the boot side cover up in order to unhook the retainer from the bezel at the top of the quarter trim panel.
10. Store both of the boot side cover assemblies in the rear compartment.
11. Close the rear compartment lid.
12. Raise the rear seat back to the up and the latched positions.
Push the seat back in order to lock the seat back into place.
13. Verify that the rear seat back does not trap the seat belts.