Lift-Out Panel Mounting Hardware Replacement (Lock Cylinder Replacement)

Lift-Out Panel Mounting Hardware Replacement (Lock Cylinder Replacement)

Removal Procedure

1. Remove roof lift-off window.




2. Remove roof lift-off handle spring (11).
3. Remove handle (1).
4. Remove trim cover bolts/screws (3).
5. Remove trim cover (10).




6. Remove lock cylinder retainer (2) from lock cylinder (3).
7. Remove lock cylinder (3) from lift-off window frame (1).

Installation Procedure




1. Install lock cylinder (3) into lift-off window frame (1).

Important: Align tabs of lock cylinder (3) with notches in latch support.

2. Install lock cylinder retainer (2) to lock cylinder (3).




3. Install trim cover (10).
4. Install trim cover bolts/screws (3).
5. Install handle (1).
6. Install roof lift-off handle spring (11).
7. Install roof lift-off window.