Lift-Out Panel Mounting Hardware Replacement (Longitudinal Bow Finish Molding)

Lift-Out Panel Mounting Hardware Replacement (Longitudinal Bow Finish Molding)

Removal Procedure

1. Remove roof lift window panels.




2. Remove roof panel longitudinal bow finish molding bolts/screws (1) from molding (2).
3. Remove longitudinal bow finish molding (2) from vehicle roof (3).

Installation Procedure




1. Install longitudinal bow finish molding (2) to vehicle roof (3).

Notice: Refer to Fastener Notice in Service Precautions.

2. Install roof panel longitudinal bow finish molding bolts/screws (1) to molding (2).

Tighten the bolts/screws as they are installed in positions 5, 3, and 4 to 1.7 N.m (15 lb in).

3. Install roof lift window panels.