Front Seat Head Restraint Replacement (Base Level)

Front Seat Head Restraint Replacement (Base Level)

Tools Required

J 39641Headrest Removal Tool

Removal Procedure

1. Remove the seatback release knob.
2. Separate the J-retainers at the bottom of the seat.
3. Pull the seat cover past the head restraint posts.
4. Slide the J 39641 up the head restraint posts with the tool tabs fitting into the open slots between the head restraint guide tabs.
5. With the headrest removal tools in place, rotate each tool so the head restraint guide tabs expand outward.




6. Remove the head restraint (3).
7. Remove the shoulder belt guide screws (2), and the shoulder belt guide (1) if required.

Installation Procedure




1. Install the head restraint (3).
2. Firmly pull down on the seat cover in order to enable the J-retainers at the bottom of the seat to lock together.
3. Install the seatback release knob.
4. Install the shoulder belt guide (1) if required.

Notice: Refer to Fastener Notice in Service Precautions.

5. Install the shoulder belt guide screws (2) to the guide (1).

Tighten the screws to 3 N.m (27 lb in).