Rear Folding Seat Back Latch Striker Replacement

Rear Folding Seat Back Latch Striker Replacement

Removal Procedure

The rear seat folds down in order to provide additional storage space in the rear of the vehicle. The seatback locks are located on the outboard sides of the seat. The strikers are located on the wheelhouse panel.




1. Remove the bolt (3).
2. Remove the sleeve (2).
3. Remove the washer (1).

Installation Procedure




1. Install the sleeve (2) over the bolt (3).
2. Install the washer (1) over the bolt (3).

Notice: Refer to Fastener Notice in Service Precautions.

3. Install the bolt (3).

Tighten the bolt (3) to 35 N.m (26 lb ft).