Coolant Heater Cord Replacement

Removal Procedure





1. Disconnect the heater cord from the block heater.
2. Route the block heater end of the cord under the power steering rack lines.
3. Cut the heater cord strap at the power steering reservoir.





4. Cut the heater cord strap at the fuse block center.
5. Remove the heater cord from the vehicle.

Installation Procedure





1. Install the heater cord and a new strap to the fuse block center.





2. Route the cord up under the power steering rack lines.
3. Install a new heater cord strap to the power steering reservoir.
4. Connect the heater cord to the coolant heater.