Oil Pump Pipe and Screen Assembly Replacement

Removal Procedure





1. Remove the oil pan. Refer to Oil Pan Replacement.
2. Remove the oil pump screen attaching bolts (2).
3. Remove the oil pump screen (1).
4. Remove the oil pump screen gasket (3).
5. Clean the screen and housing with solvent and blow dry with compressed air.
6. Clean the gasket mating surfaces on the pipe flange and cylinder block.

Installation Procedure





1. Install the oil pump screen gasket (3).
2. Install the oil pump screen (1).

Notice: Refer to Fastener Notice in Service Precautions.

3. Install the oil pump screen bolts (2).
^ Tighten the oil pump screen bolts (2) to 15 Nm (11 ft. lbs.).
4. Install the oil pan. Refer to Oil Pan Replacement.