85. Exhaust Manifold Installation - Left

1. Install the exhaust manifold gasket to the cylinder head.
2. Install the exhaust manifold to the cylinder head.
Notice: Refer to Fastener Notice in Service Precautions.

3. Install the exhaust manifold nuts.
^ Tighten the nuts 23 Nm (17 ft. lbs.).





4. Install the exhaust manifold heat shield.
5. Install the exhaust manifold heat shield nuts.
^ Tighten the two end nuts to 23 Nm (17 ft. lbs.).
^ Tighten the bottom nut to 10 Nm (89 inch lbs.).





6. Install the engine lift hook.

Important: Inspect the EGR inlet pipe for leaks. Replace the EGR adapter if the pipe leaks.





7. Install the EGR inlet pipe to the exhaust manifold.
8. Install the EGR inlet pipe bolt and nuts.
^ Tighten the nuts to 50 Nm (36 ft. lbs.) and the bolt to 25 Nm (18 ft. lbs.).