Closeout/Insulator Panel Replacement - Left

REMOVAL PROCEDURE
1. Remove the push-in retainers (2).
2. Unhook the tab on the instrument panel (IP) insulator (1) from the retaining feature on the dash mat.
3. Lift the flange on the P insulator (1) out of the kick panel.

INSTALLATION PROCEDURE
1. Align the IP insulator (1) to the bottom of the IP.
2. Lift the flange on the P insulator (1) over the kick panel.
3. Install the tab on the P insulator (1) into the retaining feature on the dash mat.
4. Install the push-in retainers (2).