Park/Turn Signal Lamp Bulb Replacement

REMOVAL PROCEDURE
1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
2. Open the access door in the front bumper air deflector.
3. Disconnect the electrical connector from the park and turn signal lamp.
4. Remove the park and turn signal lamp bulb from the socket.

INSTALLATION PROCEDURE
1. Install the park and turn signal lamp bulb to the socket.
2. Connect the electrical connector to the park and turn signal lamp.
3. Close the access door in the front bumper air deflector.
4. Lower the vehicle.