Accelerator CNTRL Pedal Replacement (TAC Module & Bracket ASM)

REMOVAL PROCEDURE




1. Remove the exterior retaining bolt and discard.




2. Remove the left instrument panel insulator.




3. Disconnect the harness from the TAC module.




4. Remove the interior retaining bolt and nut.
5. Remove the pedal/TAC module assembly from the vehicle.

INSTALLATION PROCEDURE




1. Install the pedal/TAC module assembly to the vehicle.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the interior retaining bolt and nut.

Tighten
Tighten the bolt to 25 N.m (19 lb ft) and tighten the nut to 20 N.m (15 lb ft).




3. Connect the harness to the TAC module.




4. Install the left instrument panel insulator.




5. Install the new exterior retaining bolt.

Tighten
Tighten the bolt to 8 N.m (10 lb ft).