Accelerator Controls Pedal Replacement (Pad, Spring and Pin)

REMOVAL PROCEDURE
1. Remove the TAC module and bracket assembly from the vehicle.
2. Disconnect the pad spring (5) from the rod.
3. Remove the pin (7) from the pad (6) and rod.
4. Remove the pad (6) and pad spring (5) from the rod.

INSTALLATION PROCEDURE
1. Install the pad (6) and pad spring (5) to the rod.
2. Install the pin (7) to the pad (6) and rod.
3. Connect the pad spring (5) to the rod.
4. Install the TAC module and bracket assembly to the vehicle.