SIR/SRS Wire Repair

The supplemental inflatable restraint (SIR) system supplemental restraint system (SRS) requires special wiring repair procedures due to the sensitive nature of the circuitry. Follow the specific procedures and instructions when working with the SIR/SRS system wiring, and the wiring components (such as connectors and terminals).

IMPORTANT: Do not use the terminals in the kit in order to replace damaged SIR/SRS system terminals unless specifically indicated by the terminal package.

TOOLS REQUIRED
J 38125-B Terminal Repair kit

The tool kit J 38125-B contains the following items:
^ Special sealed splices - in order to repair the SIR/SRS system wiring
^ A wire stripping tool
^ A special crimping tool
^ A heat torch
^ An instruction manual

The sealed splices have the following 2 critical features:
^ A special heat shrink sleeve environmentally seals the splice. The heat shrink sleeve contains a sealing adhesive inside.
^ A cross hatched (knurled) core crimp provides necessary contact integrity for the sensitive, low energy circuits.

The J 38125-B also serves as a generic terminal repair kit. The kit contains the following items:
^ A large sampling of common electrical terminals
^ The correct tools in order to attach the terminals to the wires
^ The correct tools in order to remove the terminals from the connectors