Operation CHARM: Car repair manuals for everyone.

Oil Level Sensor: Service and Repair

REMOVAL PROCEDURE




1. Raise and suitably support the vehicle.
2. Remove the engine oil drain plug in order to drain the engine oil.




3. Disconnect the oil level sensor electrical connector (1).




4. Remove the oil level sensor from the oil pan.

INSTALLATION PROCEDURE

NOTE: Refer to Fastener Notice in Service Precautions.




1. Install the oil level sensor from the oil pan.

Tighten
Tighten the oil level sensor to 20 N.m (15 lb ft).




2. Connect the oil level sensor electrical connector (1).




3. Install the engine oil drain plug.

Tighten
Tighten the engine oil drain plug to 30 N.m (22 lb ft).

4. Refill the engine with oil.
5. Lower the vehicle.