Blower Motor Switch: Service and Repair
HVAC CONTROL BLOWER SWITCH REPLACEMENTREMOVAL PROCEDURE
1. Remove the heating, ventilation and air conditioning (HVAC) control.
2. Pull the HVAC control blower knob (1) off.
3. Remove the HVAC control blower switch screw (2).
4. Remove the HVAC control blower switch (3) from the control.
INSTALLATION PROCEDURE
1. Install the HVAC control blower switch (3) to the control.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the HVAC control blower switch screw (2).
Tighten
Tighten the HVAC control blower switch screw (2) to 2 N.m (18 lb in).
3. Push the HVAC control blower knob (1) on.
4. Install the HVAC control.