Feature Customization - Driver's Door Delay and Shock Sensor Enable

Available on vehicles equipped with Universal Theft deterrent (UTD) system, this feature provides a driver's door delay that can be set at zero or 8 seconds from the time the driver's door is opened until the alarm sounds. The shock sensor feature, that detects sharp blows to the vehicle, can also be enabled or disabled using this chart. Refer to Content Theft Deterrent (CTD) Description for a description of the two sensitivity levels. Refer to Shock Sensor under Content Theft Deterrent (CTD) Operation for adjustment procedures.
1. Enter the programming mode.
2. Turn the parking lamps ON and OFF.
Listen to the number of chimes to determine current setting.
The factory setting above is listed in CAPITAL print.
3. Turn the parking lamps ON and OFF to increment desired setting below.
4. Continue customizing other features or exit programming mode.