Hood: Service and Repair

Hood Replacement

Removal Procedure




1. Open the hood (2).




2. Complete the following steps in order to remove the hood open assist rod (7) from the strut stud (1):

1. Pry the clip (6) out with a flat bladed tool.
2. Pull the assist rod (7) from the strut stud (1).
3. Remove the hood open assist rod (7).

3. Remove the following components from the hood hinges (4):

1. The hood hinge bolts/screws (3)
2. The hinge bracket nuts (1)

4. Remove the hood (2) from the vehicle with the aid of a helper.

Installation Procedure




1. Install the hood (2) to the vehicle with the aid of a helper.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the following components to the hood hinges (4):

1. The hinge bracket nuts (1)

Tighten the hood hinge bracket nuts (1) to 27 N.m (20 lb ft).

2. The hood hinge bolts/screws (3)

Tighten the hood hinge bolts/screws (3) to 27 N.m (20 lb ft).




3. Install the hood open assist rod (7) to the strut stud (1).




4. Close the hood (2) slowly.
5. Inspect the clearance between the following components:

* The hood (2)
* The front fenders
* For Pontiac vehicles only, the headlamp opening doors

6. Inspect the alignment of the hood (3).
7. Adjust the hood as needed. Refer to Hood Adjustment.