Trunk / Liftgate: Adjustments

Rear Compartment Lift Window Panel Adjustment






Notice: Refer to Fastener Notice in Service Precautions.

1. Perform the following steps in order to adjust the window panel flush to the quarter outer panel:

1. Center the window in the opening.
2. Open the window panel.
3. Move the rear compartment trim as needed. Refer to Liftgate Trim Panel Replacement.
4. Loosen the bolts.
5. Close the window panel.
6. Move the window panel as needed.
7. Tighten the bolts.

Tighten the bolts to 10 N.m (89 lb in).

2. Adjust the window panel flush to the quarter trim finish panel.
3. Loosen or tighten the bumpers as needed (2).