Instrument Panel (IP) - Accessory Trim Plate Replacement - Left Side

Instrument Panel Accessory Trim Plate Replacement - Left Side

Removal Procedure




1. Gently pull on the top of the instrument panel (IP) trim plate in order to disengage the retaining clips from the IP.
2. Gently pull on the bottom of the IP trim plate in order to disengage the retaining clips from the IP.
3. Remove the IP trim plate from the IP.
4. Unsnap the air outlet from the IP trim plate, if necessary.

Installation Procedure




1. Snap the air outlet to the IP trim plate, if removed.
2. Align the IP trim plate to the IP.
3. Insert the locating pins on the IP trim plate into the holes in the IP.
4. Apply pressure in order to snap the IP trim plate into place in order to secure.