Instrument Panel (IP) - Trim Pad Replacement - Upper

Instrument Panel Upper Trim Pad Replacement

Removal Procedure




1. Remove the windshield side garnish moldings.
2. Gently lift the instrument panel (IP) trim pad (2) in order to disengage the dual-lock fasteners (1).




3. Remove the daytime running lamp (DRL) ambient light sensor (1).




4. Remove the security indicator lamp (3).
5. Remove the IP upper trim panel (1).

Installation Procedure




1. Set the IP trim pad (1) into place.
2. Install the security indicator lamp (3).




3. Install the DRL ambient light sensor (1).




4. Using the locator pins (3), align the IP upper trim panel (2).
5. Apply pressure to the rear of the IP upper trim panel (2), engaging the dual lock fasteners (1).
6. Apply pressure to the front of the IP upper trim panel (2), engaging the dual lock fasteners (1).
7. Install the windshield side garnish moldings.