Instrument Panel Cluster (IPC) - Trim Plate Bezel Replacement

Instrument Panel Cluster Trim Plate Bezel Replacement (Pontiac)

Removal Procedure




1. Remove the fog lamp switch.
2. Unsnap the instrument panel (IP) cluster trim bezel.
3. Remove the IP cluster trim bezel from the vehicle.

Installation Procedure




1. Align the IP cluster bezel over the cluster.
2. Insert the locating pins on the IP cluster bezel into the appropriate holes in the IP.
3. Snap the fasteners on the IP cluster bezel into the IP in order to secure.
4. Install the fog lamp switch.