Power Mirror Switch: Service and Repair

REMOVAL PROCEDURE

IMPORTANT: Protect the trim panel with a rag when prying up the switch to prevent marring the trim panel.

1. Pry up the rear edge of the drivers side switch, the front edge of the passenger side switch.
2. Slide the drivers side switch rearward, the passenger side switch forward, out of the door trim panel.
3. Disconnect the electrical connector (6) from the mirror switch (2).
4. Remove mirror switch (2) from panel.

INSTALLATION PROCEDURE
1. Insert switch assembly into panel.
2. Install the mirror switch (2) to the panel.
3. Connect the electrical connector (6) to the mirror switch (2).
4. Insert the front edge of the drivers side switch, the rear edge of the passenger side switch, into the door trim panel.
5. Press the rear edge of the drivers side switch, the front edge of the passenger side switch, into the trim panel to secure.