Power Seat Motor: Adjustments

Seat Adjuster Phase Adjustment

Phase Adjustment Procedure






Important: The adjuster is out of phase when 1 adjuster reaches either the maximum horizontal or the maximum vertical travel before the other adjuster. An out-of-phase adjuster can occur over time or when the seat is serviced.

1. Operate the horizontal adjuster switch until one adjuster reaches a full-forward position.
2. Detach the horizontal drive cable (1) from the full-forward adjuster.
3. Operate the horizontal adjuster switch until the other adjuster reaches a full-forward position.
4. Connect the horizontal drive cable (1).
5. Inspect the horizontal travel.
6. Operate the vertical adjuster switch until one adjuster reaches the full-up position at both the front and the rear.
7. Disconnect both the front and the rear vertical drive cables (2) from the full-up adjuster.
8. Operate the vertical adjuster switch until the other adjuster reaches the full-up position at both the front and the rear.
9. Connect the vertical drive cable (2).
10. Inspect the vertical drive cable.