To Resume A Set Speed

Once cruise control has been set at a desired speed with the SET button, the set speed is stored in the memory of the controller. If the driver, for any reason, must apply the brake or depress the clutch pedal, cruise control will disengage. The cruise control may be reset in this manner:
1. Accelerate close to the desired speed (25 mph (40 km/h) or more).
2. Move the cruise control switch from the ON position to the R/A (Resume/Accelerate) position for about half a second.
3. The vehicle will accelerate to and resume the previously set speed.

If either the ignition switch or the cruise ON/OFF switch is turned off, the cruise control memory will be erased.