Cylinder Head Replacement - Right

Removal Procedure





1. Remove the engine coolant air bleed pipe. Refer to Vapor Vent Pipe Replacement.
2. Remove the right side exhaust manifold. Refer to Exhaust Manifold Replacement (Right).
3. Remove the valve rocker arms and pushrods. Refer to Valve Rocker Arm and Push Rod Replacement.
4. Remove the engine wiring harness clip bolt from the cylinder head.





5. Remove the transmission fill tube bolt from the cylinder head.





6. Remove the right side cylinder head. Service and Repair

Installation Procedure





1. Install the right side cylinder head. Service and Repair

Notice: Refer to Fastener Notice in Service Precautions.





2. Install the transmission fill tube bolt to the cylinder head.
- Tighten the transmission fill tube bolt to 47 Nm (35 ft. lbs.).





3. Install the engine wiring harness clip bolt to the rear of the cylinder head.
- Tighten the engine wiring harness clip bolt to 50 Nm (37 ft. lbs.).
4. Install the valve rocker arms and pushrods. Refer to Valve Rocker Arm and Push Rod Replacement.
5. Install the right side exhaust manifold. Refer to Exhaust Manifold Replacement (Right).
6. Install the engine coolant air bleed pipe. Refer to Vapor Vent Pipe Replacement.