Air Duct: Service and Repair

AIR DISTRIBUTOR DUCT REPLACEMENT

REMOVAL PROCEDURE




1. Remove the Instrument Panel (IP) carrier.
2. Place the IP carrier face down on a clean work surface.
3. Remove the air distributor duct bolts.
4. Remove the air distributor from the IP carrier.

INSTALLATION PROCEDURE




1. Install the air distributor to the IP carrier.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the air distributor duct bolts.

Tighten
Tighten the air distributor duct bolts to 2.2 N.m (19 lb in).

3. Install the IP carrier.