Brake Light Switch: Service and Repair

Removal Procedure





1. Remove the left side instrument panel insulator. Refer to Closeout/Insulator Panel Replacement - Left in Instrument Panel, Gauges and Warning Indicators.
2. Disconnect the electrical connector from the switch.
3. Remove the Stoplamp and TCC switch (3) from the bracket (1 ).

Installation Procedure





1. Install the Stoplamp and TCC switch (3) to the bracket (1).
2. Connect the electrical connector to the switch.
3. Adjust the Stoplamp and TCC switch. Refer to Stoplamp Switch Adjustment.
4. Install the left side instrument panel insulator. Refer to Closeout / Insulator Panel Replacement - Left in Instrument Panel, Gauges and Warning Indicators.