Parking Lamp: Description and Operation

When the turn signals are activated, the appropriate front parking lamp flashes to signal a turn. The turn signal works only when the following conditions apply:
^ The ignition switch is on.
^ The hazard lamp flashers are turned off.

The turn signals are controlled by the multi-function lever. The multi-function lever is located on the left side of the steering column. Moving the lever up or down (past the detect) will activate the turn signals.

When the turn is complete the following actions will occur:
^ The multi-function lever will return to the horizontal position.
^ The turn signals will stop flashing.

Move the signal only to the first detent and hold it there during the following actions:
^ Changing lanes
^ Shallow turns where the steering wheel does not turn far enough to cancel the signal

When you release the lever, the lever will return to the horizontal and the turn signal will cancel.