Battery Tray Replacement

REMOVAL PROCEDURE
1. Remove the battery.






2. Remove the coolant recovery reservoir hose from the radiator.






3. Remove the accelerator and cruise control servo cable adjuster bolts, if equipped with a 5.7 L engine.
4. Reposition the accelerator and cruise control servo cable adjuster.






5. Remove the coolant recovery reservoir bolt






6. Remove the wiring harness rosebud clip from the reservoir neck.
7. Remove the coolant recovery reservoir/battery tray.






8. Remove the coolant recovery reservoir hose from the reservoir/battery tray.

INSTALLATION PROCEDURE






1. Install the coolant recovery reservoir hose to the reservoir/battery tray.
2. Install the coolant recovery reservoir/battery tray.






3. Install the wiring harness rosebud clip to the reservoir neck.

NOTE: Refer to Fastener Notice in Service Precautions.






4. Install the coolant recovery reservoir bolt.

Tighten
Tighten the coolant recovery reservoir bolt to 12 N.m (106 lb in).






5. Position the accelerator and cruise control servo cable adjuster, if equipped with a 5.7 L engine.
6. Install the accelerator and cruise control servo cable adjuster bolts.

Tighten
Tighten the accelerator and cruise control servo cable adjuster bolts to 7.5 N.m (66 lb in).






7. Install the coolant recovery reservoir hose to the radiator.
8. Install the battery.
9. Add engine coolant to the FULL COLD mark on the reservoir.