Multifunction, Turn Signal Lever

Removal Procedure

Caution: Refer to Battery Disconnect Caution in Service Precautions.

Important: Position the windshield wiper switch in the OFF position.

1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnect/Connect Procedure in Starting and Charging.





2. Remove the steering column access cover.





3. Disconnect the multifunction lever electrical connector.
4. Remove the multifunction lever.

Installation Procedure
1. Install the multifunction lever.





2. Connect the multifunction lever electrical connector.





3. Install the steering column access cover.
4. Connect the negative battery cable. Refer to Battery Negative Cable Disconnect/Connect Procedure in Starting and Charging.